Findest du asynchrone Türschließungen gut? Do you like asynchronous door locking? 56
Das Ergebnis ist nur für Teilnehmer sichtbar.
Hi!
Bei Trambahnen und Bussen öffnen und schließen sich normalerweise nicht alle Türen gleichzeitig. Moddingtechnisch ist das umsetzbar. Jedoch würde die Reihenfolge und der Ablauf immer gleich aussehen (Die ÖBB 4020 hat das z.B.)
Die Avenio TZ (Tram) besitzt im Vergleich zum Vorgänger eine Zwangsschließfunktion, bei der an den Türen dann rote LED Leisten leuchten.
Man könnte also programmieren, dass sich die Türen nacheinander schließen, die letzten zwei dann zum Beispiel via Zwangsschließung mit LED Leuchtleiste.
Jedoch wäre das dann an jeder Station genau gleich und wäre natürlich auch nicht so realistisch.
Zudem braucht die Animation dann länger, wodurch die Haltezeit verlängert wird und eventuell Stau entsteht. Dafür könnte man z.B. Loading Speed erhöhen (habe ich beim Siemens C2 Inspiro so gemacht)
Auf asynchrone Türöffnung würde ich verzichten, da diese theoretisch gleichzeitig aufgehen, wenn alle Türen angefordert und gleichzeitig entsperrt werden. Finde das ist das kleinere Übel und kann so gelassen werden.
Asynchrone Türschließungen:
Contra:
Animation an jeder Haltestelle gleich
-> auch nicht so realistisch
Die Animation wird dadurch länger, wodurch sich die Haltezeit erhöht.
mehr Programmieraufwand, aber das mach ich gern : D
Pro:
Etwas realistischere Animation
Rote LED Leisten bei Zwangsschließung
Nicht jeder Mod/Fahrzeugkonfiguration gleich, also mehr Abwechslung
Man könnte die Ladegeschwindigkeit erhöhen um die Haltezeit nicht zu lange zu verlängern
Ich bitte auch um wörtliche Kommentare, da diese ausführlicher sind und mehr Aussagekraft besitzen, danke
In trams and buses, not all doors open and close at the same time. This can be implemented by modding. However, the order and sequence would always look the same (e.g. ÖBB 4020 has this).
In comparison to its predecessor, the Avenio TZ (tram) has a forced closing function in which red LED strips light up on the doors.
So I could program the doors to close one after the other, the last two then e.g. via forced closing with LED light strip.
However, this would then be exactly the same at each station and of course would not be so realistic.
In addition, the animation will take longer, which will increase the station time and possibly lead to traffic jams. But I could increase e.g. Loading Speed (I did this with the Siemens C2 Inspiro).
I would do without asynchronous door opening, because theoretically these open at the same time when all doors are requested and unlocked at the same time. In my opinion the door closing is more important.
Asynchronous door closings:
Contra:
Animation the same at every stop
-> also not so realistic
This makes the animation longer, which increases the holding time.
more programming effort, but I like to do that : D
Pro:
More realistic animation
Red LED strips for forced closing
Not every mod/vehicle configuration the same, so more variety
One could increase the loading speed in order not to prolong the station time too long.
I also ask for comments, because these are more detailed and have more expressiveness, thank you