Is there anyone who is really good at Modding? i have a loco that i have seen in action in northern BC (British Columbia) on the Tumbler Ridge Subdivision. It is a General Electric GMD GF6C. I you like to see it run in the BC Rail Livery as well as Canadian National Livery. Thanks again for anyone who is interested and wants to take on the challenge.
BC Rail used these and other Locomotives on this line as it had steep grades and tight corners as it crisscrossed the Rocky Mountains. Mostly used to haul logs to the mills in Prince Rupert and Sheena Valley as well as coal and iron ore.
the following is a link to the page http://www.classicstreamliners.com Classic Streamliners is a good resource for North American locomotives (Engines) as we call them.
https://nebula.wsimg.com/30061…sposition=0&alloworigin=1
GMD GF6C Overview
Type and origin
Power type: Electric
Builder: General Motors Diesel
Serial number: A4340–A4346
Model: GF6C
Build date: 1983–1984
Total produced: 7
Specifications
AAR wheel arrangement: C-C
UIC class: Co′Co′
Gauge: 4 ft 8 1⁄2 in (1,435 mm)
Trucks: EMD HTC
Wheel diameter: 42 in (1,067 mm)
Length: 68 ft 10 in (20.98 m)
Locomotive weight: 396,000 lb (180,000 kilograms)
Electric system: 50 kV AC Catenary
Current collection: Pantograph
Traction motors: 6 × EMD E88X
Performance figures
Power output: 6,000 hp (4.47 MW)
Career
Operator: BC Rail (BCOL)
Numbers: BCOL 6001–6007
Locale: British Columbia, Canada
Disposition: 6 scrapped, 1 preserved
I have another one lol EMD GM6C, this loco also briefly ran on the line and looks sharp in any livery, here is the link
https://nebula.wsimg.com/b79d7…sposition=0&alloworigin=1
EMD GM6C Overview
Type and origin
Power type: Electric
Builder: GM-EMD
Serial number: 75605-1
Model: GM6C
Build date: May 1, 1975
Total produced: 1
Specifications
AAR wheel arrangement: C-C
Gauge: 4 ft 8 1⁄2 in (1,435 mm)
Trucks: EMD HTC
Wheel diameter: 42 in (1,067 mm)
Length: 68 ft 10 in (20.98 m)
Width: 10 ft (3.05 m)
Height: 14 ft 9 1⁄2 in (4.51 m) (over locked-down pantographs)
Locomotive weight: 365,000 lb (165,561 kg) or 182.5 short tons (162.9 long tons; 165.6 t)
Electric systems: Switchable - 11 kV 25 Hz, 25 kV 60 Hz, Northeast Corridor Catenary
Current collection: Pantograph
Generator: EMD D79MA75
Traction motors: 6 × EMD E88X
Performance figures
Power output: 6,000 hp (4.47 MW)
Tractive Effort Starting: 126,000 lbf (560.5 kN)
Tractive Effort Continuous: 44,000 lbf (195.7 kN) @ 46 mph (74 km/h)
Career
Operators: Penn Central (later Amtrak and Conrail)
Numbers: 1975 (later 4975)
Locale: Northeast Corridor electrified lines
Disposition: Scrapped
Edit by Yoshi: Merged double posts and moved to the right topic. Please read the forum rules and the request rules as well, as this is no complete Request.