Wir begrüßen euch in der Fan-Community zu den Spielen Transport Fever und Train Fever, den Wirtschaftssimulatoren von Urban Games. Die Community steht euch kostenlos zur Verfügung damit ihr euch über das Spiel austauschen und informieren könnt. Wir pflegen hier einen freundlichen und sachlichen Umgang untereinander und unser Team steht euch in allen Fragen gerne beiseite.
Die Registrierung und Nutzung ist selbstverständlich kostenlos.
Wir wünschen euch viel Spaß und hoffen auf rege Beteiligung.
Das Team der Transport-Fever Community
Together with the fantastic news from RaptorArk and DomTrain, I must show something too: the Ale724 is near the end, only the polishing is left and it's ready to be published!
Take these early photos of the almost finished product!
(Sorry these are literal photos of the screen)
Finally 
small part of vanilla vehicles repainted, just to fill the pack
Very nice Dom! 
So, this is the final stage. I think that paints are more or less good, will check for more details later, before publishment (or punishment)
While Tricolore locomotive is being worked by french assault squad, I am starting freight pack
first one, hopefully will be completed tomorrow.
It's just a GABS wagon. As far as I remember there was a version of this in tpf1.
Good to carry goods but surely not to carry mozzarellas. Maybe tortellini but surely no mozzarella.
Hello.
My aim, about the cargo set, is to build a pack with these wagons:
- Gabs
- Falns
- Kgps: will transport containers (custom dma goods)
- Roos
and, probably, also Zags (they're mainly from private corporations).
I've already renounced on some wagons, like Hbilns, as they are already available on the workshop. If you know about the existence of those wagons, please notify.
They will all have end-of-the-train flashing tail lights.
This will be a start set, I will add more in the future.
About passengers carriages:
- Tipo 1947 and 1951R Corbellini
- Tipo 1933 Serie 46000 "Terrazzini"
- Tipo 1928R Serie 39000 Centoporte
Maybe have a look at this ... [Sammelthema] Screenshots und Videos von euren TPF2-Welten
Very nice
come on, that was pretty interesting
Very nice, but it's an Alstom vehicle, not akiem/bombardier
ah sorry
Hello. This is what it is coming next: E436 (from french BB36000).
This locomotive is called "Astride". It is built by Akiem and Bombardier. Alstom.
It is a "Bicourrant" (or multi-tension. To be honest multi-tension is more correct, as it is indicating the capability of being powered by more Tension voltages. It is not in use to indicate currents, that is measured in ampere) that can run under 1500V, 3000V d.c. and 25.000V ac. It can go mainly in French and Italy with no problems but it is also capable to drive in all the european countries using 25000V AC (so that means all the high-speed lines and many other traditional lines in countries like croatia, hungary, romania and so on).
I don't like Modern Trains but this has always intrigued me. This was a great success, while we failed (in italy) with the E405 and E412 locomotives (cause of political tards issues).
aggiungo alla lista intanto
Nice, it is already in a great shape! 
Well, since you are a total beginner I'd suggest...
Oh, nevermind! Keep up the good work, and ask us if you encounter any problem!
yeah, mainly cause importing the thing in the game is a bestemmia with no end
That's good news! I'm a total beginner at mod making for Tpf2, but I want to try and start my first project! I hope that will be not too much painful to convert the model from sketchup! I hope that Licaon could give me some advices!
Making the ETR 450 "Pendolino" is a bit complicated because I can't find high resolution schematics and there's a lot of details to replicate, but I think that the nose was a really tough part and that it came out fairly well. My plan is to make the pilot carriage, normal carriage, carriage with pantograph, central carriage (i think is the Cafe but I can't find any clue or image about that). With these I believe I would be able to put together the complete configuration
This is already a perfect work!
Oh I see, it will be ok anyway
you have to delete every single post when upgrading to DC, which is very annoying.
Hello!
There are already modder using program such as sketch up. Licaon is an example.
I think you can do the same. Just ask... If you take the right manners and the right times, you will do it 👍
RaptorArk Corbellini, terrazzini and CentoPorte Set RA
i love tortellini btw
Added Tortellini coaches
Yeah, important update to those UIC-X. If you are encountering problems, please re activate the mod from steam or just download the base set from our forum. I've added flashing rear lights to the first series and fixed chassis rear lights to the others.
The train will also, automatically, put those rear lights on only on the last wagon of the composition.
That means .mdl modifications, as long as new meshes for it. That's why it could not work... but I hope it works 
I am working on F, FF, Hg and L freight cars. I only have less spare time so it takes a while...
Added
btw who ever know something that's missing, just post here and I update this list, bringing it up periodically on this topic, while the time flows and we get older and older (and will have wifes/husbands, sons, cousins, neighbours, secret lovers, animals and so on...)
Alles anzeigenHi everyone.
Taking into account the list posted by Raptor, with what has been done and what is planned (or already started or yet to be started), I will place what we would miss.
Certain models can be obtained with simple repaints of models that already exist.
Other models must be created from scratch, but you could rely on those in 3D already created for the Train Simulator by my friends (with whom I have spoken and who are willing to help us).
They can be seen on the website: http://www.ildeposito.net/N_Downloads.htm
A lot has already been done (unthinkable until a few months ago - thank you very much everyone!) Nobody runs after us!
To give a little completeness to the game, some steam and diesel locomotives, some old diesel railcars and above all passenger cars built between 1910 and 1960 are missing, models that would cover eras even until 1980.
Dom Train has already made it clear that it intends to create a package of old FS three-phase loco, which can be joined by those in c.c. and they will cover an extraordinary period from 1920 until 1976! In the package there will also be the three-phase catenary, which can be added to the traditional one to the game. It will not be a replacement but more.
Personally I would suggest (trying to optimize existing models):
1 - STEAM LOCOMOTIVES
FS Gr. 999 - Simple REPAINT of the Class 89 Prussian T3 of the game;
FS Gr. 271- Simple REPAINT of the Class 53 Prussian G3 of the game;
FS Gr. 222 - Model of the KKSTB 47 already made for TF1 by Franzl;
FS Gr. 729 - Model of the KKSTB 170 already made for TF1 by Franzl;
FS Gr. 479 - Model of the KKSTB 280/380 already made for TF1 by Franzl;
FS Gr. 421 - Model of the Preußische G 7.2 und Baureihe 55.7-13 already made for TF1 by Pufferzone / Skyjoe.
FS Gr. 675 - Prussian P8 model already made for TF1 (Modell der preußischen P8)
There are also others already "ready", the authors should be heard if they are available and allow these repaints.
It would be great to have some typically Italian construction machines, such as:
FS Gr. 875/880 for light trains;
FS Gr. 740-741-743-940 (with a project of the lower part, 4 loco are made);
FS Gr. 625 and 640;
FS Gr. 685;
FS Gr. 691.
For all these models, authorization could be sought from the owner of the Il Deposito site, to take advantage of the existing 3D models for TS.
2- DIESEL LOCOMOTORS
Taking into account Raptor's announcement that he will make D 343-345-445, I would say that they could be added later:
FS D 341; FS D 342.
Even for these models, authorization could be sought from the owner of the Il Deposito site, to take advantage of the existing 3D models for TS.
3- DIESEL RAILCARS
A lot of features on FS since the 1920s, some models would be needed:
FS ALn 556; FS ALn 772; FS ALn 880 and 990; ALn442 / 448 TEE Breda.
Raptor announced the ALn 668 and ALn 663. Very well!
For the 668 I recommend making the 1400 series, which would cover from 1960 to 2000: 40 years of play!
For all these models, authorization could be sought from the owner of the Il Deposito site, to take advantage of the existing 3D models for TS.
4 - THREE-PHASE LOCOMOTORS
Dom Train seems interested in developing a package of old three-phase locomotives, as already mentioned.
E 431, E 432 and E 554 are needed to start.
After that it would be wonderful to be able to have the E 551 and the E 333 as well.
For all these models, authorization could be sought from the owner of the Il Deposito site, to take advantage of the existing 3D models for TS.
5 - LOCOMOTORS c.c.
With the E 626 announced we will be practically in place. Thanks to Raptor Art, Danny has almost everything.
Rather, Repaints will be needed for some locos such as the E 424, the E 645 of the first series to also have those in the 60/70 era, which are missing.
6 - ELECTRIC RAILCARS (DMU).
Thanks to Raptor we have almost everything.
I would add the ALe 840, which can also be used in the three-phase package, creating the two-current trailer.
7 - ELECTROTRAINS (ETR).
We have everything, among the modern.
The Pendolino 460 is coming.
In my opinion, prestigious ETRs are missing such as:
FS ETR 250/300 Settebello;
FS ETR 200/240 Which can be used from the 30s to the 90s.
8 - PASSENGER CARRIAGES
Raptor has planned to make important carriages such as the Centoporte, Corbellini and Terrazzini.
I would add later:
Type 1921, needed to cover from the 20s to 1985.
Type 1946 series 33000;
Type 1959 series 45000.
They were the most important carriages, they also went abroad and arrived until the late 1980s.
CIWL carriages, beds and restaurants are missing like bread.
9 - LUGGAGE
At least these should be done:
FS DI 90000 with two axes;
FS Dz type 1946;
FS Dz trunk type X.
10 - GOODS WAGONS
You are spoiled for choice.
However, both Licaon and Raptor have announced interesting things.
I am available to everyone.
I can provide technical data sheets, data and photos.
Pretty much everything.
I can act as your intermediary to obtain 3D models.
The only thing is that in case of free transfer of models, the author asks only that his name be (rightly) mentioned.
Ciao!
PS I hope I haven't written the wrong things, because I also had to make do with the google translator.
Mauri stop dreaming, do you have any idea of how much is that?
