Help, how does it work, setup correctly.
i want a transport Network Provider setup that spread out to fill a building module, i need a 1 line 4 times, with jumps with 2. so 4 lines next to other.
tried, different config, many possiblity, every time the last one wins. Or error, no show at all.
got one line working but copy it move it -2 or +2 on the y-asis it looks not strait any more. 1st one is shown not used any more.
tried to move it at the end of the model 180 degrees, run it back to the front en u turn back till the space is full. No result at all.
played with side building basics set op. can not get a 4x4
nothing works.
- how does it work.
- how to set up correctly. strait lines
is does'nt follow basic point setup
example
{
{ 2, -0.2, -0.3, }, = 1 Start point (not strait)
{ 2, -9.6, -0.3, }, =1 end point
0.2,
},
{
{ 2, -9.6, -0.3, }, = 2 Start point (not working)
{ 4, -9.6, -0.3, }, = 2 end point
0.2,
},
{
{ 4, -9.6, -0.3 }, = 3 Start point (not working)
{ 2, -9.6, -0.3, }, = 3 end point
0.2,
},
