[Blockierte Grafik: http://ftp.train-fever.net/flaggen/de.png] German translation by Mediziner Here
[Blockierte Grafik: http://ftp.train-fever.net/flaggen/gb.png]
REQUIREMENTS
Train Fever 5798 or above.
PLATFORMS
Windows
Mac
Linux
DOWNLOAD
Download the mod here
DESCRIPTION
This mod enable all vehicles, roads, stations, cars, buildings etc. at the same time or linear with no expiration time. It can also adjust the life span with a factor.
This mod works on both vanilla and non-vanilla models. This mod can be combined with the cost_mod without interference.
This mod has been rewritten for the new mod system and no Lua console should be used at all. Just follow the instructions below.
INSTALL
The timeless mod is written for the new mod system and must not be copied into the res folder, as before.
Manual install
Unzip the archive in Train Fever/mods/ folder.
Start TF and activate the mod before playing.
TFGM install
Drag & drop the archive to TFGM.
Enable the mod
Start TF and activate the mod before playing.
UNINSTALL
The good news with the new mod system is that no files are being modified. This makes it easy and safe to remove the mod at any time.
Manual uninstall
Simply delete the the Train Fever/mods/gwinda_timeless_mod_x folder where x is the mod's major version number.
TFGM uninstall
Simply select the mod and press disable.
The mod is kept in TFGM's internal library and can be enabled again at any time. To completely remove it from library select the mod and press uninstall.
CONFIGURATION
The new mod system doesn't have the same rich support as TFGM have and TFGM has not yet been updated to solve this new issue.
To edit the lifespan and time modes you will find the configuration file here:
Train Fever/mods/gwinda_timeless_mod_x/res/scripts/timeless_mod_config.lua where x is the major version of the mod.
The configuration file decides what time mode to play with and/or the age ratio of all vehicles.
There are two main variables; To and From that controls, independent of each other, when Vehicles
will appear and disappear from production. Ageing is also an independent variable that act as a
factor to multiplied with the Vehicle's Life span.
From
Controls when vehicles will start to appear.
From = Disable All Vehicles available from start.
From = Original Vehicles will appear without modification.
To
Controls when vehicles will be out of production.
To = Original Vehicles will be taken out of production without modification.
To = Infinite Vehicles will never be taken out of production.
Ageing
This is a factor to control how fast the vehicles will age.
Filter
A filter for each rail and tram types can be created. If empty all type will be included,
but if you only want to include locomotives of a specific engine type, you can create a filter:
Filter['RAIL'] = 'STEAM' will only include Steam locomotives.
Filter['RAIL'] = 'DIESEL' will only include Diesel locomotives.
Any of the engine types can be combined:
Filter['RAIL'] = 'STEAM,HORSE,DIESEL' will include all locomotives except ELECTRIC.
Filter['TRAM'] = 'HORSE' will include horse powered trams.
Valid filter options are HORSE,STEAM,DIESEL and ELECTRIC. They can be in CAPS, small or CaMeL separated by any character.
At this point, the filters are applied only to trams and trains (not busses or trucks)
Example:
0, Disable or Infinite = the lifetime is infinite
0.5 = 50% the lifetime is 50% shorter (half)
1.0 = 100% the life time is unchanged
2.0 = 200% the lifetime is doubled
Configuration examples
Example 1; Vehicles will appear as normal but never taken out of production:
From = Original
To = Infinite
Example 2; All vehicles will appear and never taken out of production:
From = Disable
To = Infinite[/code]
Example 3; All vehicles will appear (excluding DIESEL and ELECTRIC trams and trains) and never taken out of production:
From = Disable
To = Infinite
Filter['TRAM'] = 'HORSE,STEAM' -- Include only HORSE and STEAM trams
Filter['RAIL'] = 'HORSE,STEAM' -- Include only HORSE and STEAM locomotives
After any changes, save the file and create a new game or reload your save game (No need to re-enable or restart TF in between).